RIP Dry Type Wall Bushing
RIP (Resin Impregnated Fiberglass) Dry type Porcelain Wall bushing adopts the porcelain meets the IEC 62155. Why choose us? 1.Certification: ISO9001, ISO14001, OHSAS18001 2.Type Test Report 3.Rated voltage: from 1 kV to 1100 Kv 4.Rated current: from 1A to 4000A 5.Installed angle: 0-360°...
RIP (Resin Impregnated Fiberglass) Dry type Porcelain Wall bushing adopts the porcelain meets the IEC 62155.
Technical standards | IEC 60137 Ed.6.0 | IEC 60137 Ed.6.0 | IEC 60137 Ed.6.0 |
Rated voltage | 72.5kV | 126kV | 252kV |
Rated current | 1-4000A | 1-4000A | 1-2500A |
1min power frequency dry(wet) voltage withstand | 140kV | 185kV | 395kV |
Full-wave impulse withstand voltage of lighting | 325kV | 450kV | 950kV |
Under 1.05 times of maximum phase voltage tan δ | ≤0.005 | ≤0.005 | ≤0.005 |
Partial discharge under the rated voltage | ≤10pC | ≤10pC | ≤10pC |
Bending resistant test load | 1000--5000N | 1000--5000N | 1000--5000N |
The minimum nominal creepage distance | 31mm/kV | 31mm/kV | 31mm/kV |
Why choose us?
1.Certification: ISO9001, ISO14001, OHSAS18001
2.Type Test Report
3.Rated voltage: from 1 kV to 1100 Kv
4.Rated current: from 1A to 4000A
5.Installed angle: 0-360°
6.Bushing is Dry type, without Oil, Anti-Blast. Free Maintained. 9 level anti-seismic
7.Standard: IEC 60137,IEEE or other international standard
8.Low price
9.Short delivery time:0-90 days
10.Payment methods: T/T, L/C, etc.